Free tools

Beat to Note

Play one drum hit faster and faster until it stops being a beat and becomes a note. Then hear two drums become an interval, three become a chord, and one kick drum play a whole song.

Drum

Hits per second

How it works

A drum hit is a short burst of sound. Play it once a second and you hear a beat. Play it faster and faster, and somewhere around 20 hits per second your ear stops hearing separate hits and starts hearing a tone. From there, the number of hits per second is the pitch. 110 hits per second is the note A2, 220 is A3 and 440 is A4.

So rhythm and harmony are the same thing at different speeds. Two drums playing 3 against 2 make a polyrhythm when they are slow. Speed both up together and the same 3:2 becomes a perfect fifth. Three drums at 4:5:6 become a major chord.

The four modes

One drum repeats a single hit at the speed you set, from 1 to 1000 hits per second. Drag the slider or the strip under the circles, or press Sweep up to hear it climb from a slow beat into a note.

Two drums and Three drums play the same drum at a ratio. Pick an interval or a chord, then move the speed. Slow, you hear a polyrhythm. Fast, you hear the interval or chord.

Whole song plays a four-bar loop where the beat, the bass, the chords and the melody are all the same drum at different speeds. Turn parts off to hear what each one adds.

Take the tour walks through all of it in under 40 seconds: one drum speeding up, then a fifth, then a chord, then the song.

Changing the drum

A kick turns into a deep, round note and a hi-hat into a thin, buzzy one. The pitch stays the same, because the pitch comes from the speed and not from the drum. What the drum changes is the tone.

What you save

In the first three modes, Save as WAV records a sweep from one hit per second up to the speed you set, then holds it for a few seconds. In Whole song it records the loop twice. Save the tour records the whole tour. All files are 24-bit, 44.1 kHz stereo WAV.

Good to know

Use headphones or proper speakers. Phone speakers cannot play the low notes, so the bass and the lowest speeds sound like clicks on a phone.

The intervals and chords here use exact whole-number ratios. A piano is tuned slightly differently, so these chords sound a little smoother and purer than the same chords on a piano.

On an iPhone or iPad, if you hear nothing, check that silent mode is off. Your settings are remembered in this browser, and Copy link gives you a link to the exact setting. Nothing is sent to a server.

More free tools

All tools →
Song Starter

Pick a genre and a mood and get a full starting point for a song. Lock the parts you like and shuffle the rest.

Open Song Starter →
Scale Explorer

See and hear any scale on a keyboard, with its chords, its mood and a phrase for your prompt.

Open Scale Explorer →
Chord Loop

Build a chord progression from the chords in your key, loop it with a beat and save it as MIDI or audio.

Open Chord Loop →
Hook Keys

Your typing keyboard becomes an instrument. Play notes and chords locked to a scale, record a loop, save it as MIDI and audio.

Open Hook Keys →
Sound Shaper

Pick a supersaw, pluck, bass, pad, lead or hoover and shape it with ten plain-language knobs. Save it as a WAV.

Open Sound Shaper →
Arrangement Planner

Lay out a song in bars and see where every section lands in minutes and seconds.

Open Arrangement Planner →
Track Visualizer

Turn a track and its cover art into a video that moves to the music. Save it for YouTube, Shorts or TikTok.

Open Track Visualizer →
Mix Builder

Line up tracks into a beat-matched DJ mix or mixed album with real transitions. Listen, tweak and save the whole mix.

Open Mix Builder →
Key & BPM Finder

Drop in your tracks and get the tempo, the key and the Camelot code for each one. Check it by ear with a beat click.

Open Key & BPM Finder →
Mix Check

See how loud your master is, how much Spotify, YouTube and Apple Music will turn it down, and compare it with a reference.

Open Mix Check →
Fake 320 Checker

Find out if an MP3 or WAV is really full quality or an upscaled low-bitrate file, with a spectrum picture of each track.

Open Fake 320 Checker →
Tag Editor

Fix artist, title, BPM, key and artwork in MP3, FLAC, AIFF and WAV files so they show up right in Rekordbox and Serato.

Open Tag Editor →