Free tools

Sound Shaper

Pick an electronic sound and shape it with ten knobs named for what you hear. Play it on the keys, hear it in a loop, and save it as a WAV.

1. Pick a sound

2. Hear it

3. Shape it

Drag a knob up or down. Double-tap it to put it back.

4. Play it

On a computer, play with A to K and the row above it. Z and X change the octave. Space starts and stops the loop. Highlighted keys are in the key you picked.

5. Save it

How it works

Pick a type of sound, then one of its starting sounds. Press Play loop to hear it in a short four-bar phrase written for that kind of sound, or play it yourself on the keys. Turn the knobs while it plays and you hear every change straight away.

Every sound is built in your browser from oscillators, filters and effects, the same parts a hardware or software synth uses. There are no sample files. The knobs change those parts directly, which is why a supersaw can go from thin and narrow to huge and wide instead of just getting louder or muffled.

The knobs

KnobWhat it does
BrightnessOpens or closes the filter. Low is muffled, high is crisp.
ThicknessAdds layers, a second oscillator and a sub underneath.
WidthDetunes the layers against each other, spreads them left and right and adds chorus.
PunchHow fast the note starts and how hard the filter snaps open. Turn it down on a pad for a slow swell.
TailHow long the sound decays and rings after the note ends.
MovementA slow wobble on the filter, a vibrato on leads, or a drifting detune on reese and hoover sounds.
GritSaturation and distortion.
SpaceReverb, from dry to a large hall.
EchoA dotted-eighth delay that bounces left and right, locked to the tempo.
PumpSidechain ducking on every beat, locked to the tempo. Leave the kick drum on to hear it the way it sounds in a track.

Drag a knob up or down, or left and right. Double-tap or double-click it to put it back where the starting sound had it. A small dot next to the name means the knob has been moved. On a computer you can also click a knob and use the arrow keys.

What you save

Save loop renders the four-bar phrase with your sound, in the key and at the tempo you picked. It starts exactly on the first beat, so it lines up when you drop it into a DAW, and it runs a little past bar four so the last notes and the reverb can ring out. The kick drum is never in the file.

Save one note renders the last note you played, held and then let go, with its full tail. That is the file to load into a sampler. If you have not played a note yet, it uses the root of your key.

Both are 24-bit, 44.1 kHz stereo WAV files.

Good to know

On an iPhone or iPad, if you hear nothing, check that silent mode is off.

Copy link gives you a link that opens this exact sound with your knob settings, key and tempo. Your last sound is also remembered in this browser. Nothing is sent to a server.

The sounds here are electronic sounds that synths make naturally. Acoustic instruments like piano, strings or bouzouki are not part of this tool yet.

More free tools

All tools →
Song Starter

Pick a genre and a mood and get a full starting point for a song. Lock the parts you like and shuffle the rest.

Open Song Starter →
Scale Explorer

See and hear any scale on a keyboard, with its chords, its mood and a phrase for your prompt.

Open Scale Explorer →
Chord Loop

Build a chord progression from the chords in your key, loop it with a beat and save it as MIDI or audio.

Open Chord Loop →
Hook Keys

Your typing keyboard becomes an instrument. Play notes and chords locked to a scale, record a loop, save it as MIDI and audio.

Open Hook Keys →
Beat to Note

Speed up one drum hit until it turns into a note, then a chord, then a whole song. Hear where rhythm becomes pitch.

Open Beat to Note →
Arrangement Planner

Lay out a song in bars and see where every section lands in minutes and seconds.

Open Arrangement Planner →
Track Visualizer

Turn a track and its cover art into a video that moves to the music. Save it for YouTube, Shorts or TikTok.

Open Track Visualizer →
Mix Builder

Line up tracks into a beat-matched DJ mix or mixed album with real transitions. Listen, tweak and save the whole mix.

Open Mix Builder →
Key & BPM Finder

Drop in your tracks and get the tempo, the key and the Camelot code for each one. Check it by ear with a beat click.

Open Key & BPM Finder →
Mix Check

See how loud your master is, how much Spotify, YouTube and Apple Music will turn it down, and compare it with a reference.

Open Mix Check →
Fake 320 Checker

Find out if an MP3 or WAV is really full quality or an upscaled low-bitrate file, with a spectrum picture of each track.

Open Fake 320 Checker →
Tag Editor

Fix artist, title, BPM, key and artwork in MP3, FLAC, AIFF and WAV files so they show up right in Rekordbox and Serato.

Open Tag Editor →